Trijicon RMRcc Cut
We mill the pocket (with bosses) to use with an Ameriglo front sight and the ATEi Shimsight. Because the distance between the safety plunger hole and the rear dovetail on the 43,43X, 48, etc… and some other slim pistol slides is not long enough, we will be using the ATEi Shimsight without a rear dovetail. This means that we will be machining through and removing the rear dovetail on these slides. The ATEi Shimsight is a great option for use with the RMRcc, as it lets the user decide the placement of the rear back up sight (in front or behind the RMRcc).
The Trijicon screws and seal plate must be included with the RMRcc if you want it mounted on the slide by ATEi.
ATEi Shimsight can be selected and added from the Accessories listed.
Firearms that we offer milling for Trijicon RMRcc Red Dot optic are: Most Glock Models (except .22cal and .380) All S&W M&P Full Size and Shield (except .22cal, .380 and EZ models) CZ P07, P09, P10 FN 509 H&K VP9, VP40, SK Sig P365, P320, P229, P228, P226, P220 Springfield HellCat Nearly All 1911/2011.
Please include the internals with your slide. The RMRcc optic, seal plate and screws from Trijicon must be sent in with the slide for the RMRcc Cut.
The barrel and recoil assembly are not needed.